How to apply a vinyl decal to your car
What's a better way to tell other drivers that you don't mess around than a giant skull and crossbones car decal? Let me tell you, it's not a decal that says "My Child is an Honors Student at [Insert Random Middle School]."
Our 12-inch Death Wish vinyl car decal, free with every order today (4/4), includes our logo and "The World's Strongest Coffee" underneath, proving that your car is fueled by death. We put together a simple step-by-step guide on how to put this vinyl on your car.
This vinyl is applied by putting the decal face down and removing both a white paper backing and transfer tape.
STEP 1: Clean
Clean the area thoroughly with rubbing alcohol or soap and water. Do not use a glass cleaner because it will leave a residue behind that will prevent the sticker from adhering.
STEP 2: Prep your vinyl for application
Rub a squeegee or credit card firmly across the sticker through the transfer tape to prepare it for application. This ensures the sticker will cling to the transfer tape and removes any air bubbles that may have formed.
STEP 3: Peel off the white paper backing
Peel the white paper backing off the sticker. If the sticker clings to the transfer tape, slowly replace the paper backing and repeat Step 2.
STEP 4: Slowly lower sticker onto desired spot and rub firmly
Slowly lower the sticker onto your car surface and rub it in place firmly with a squeegee or credit card. Make sure you go over all the vinyl to ensure a proper stick to the window.
STEP 5: Slowly peel off transfer tape
Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off of the surface. If the sticker pulls away from the surface repeat Step 4.
That's it! After step 5, you're ready to hit the road in style.
To get this decal, simply place an order today on our website. If you're a coffee subscriber, don't worry! You'll get it in your next subscription order.
ENTER TO WIN FREE COFFEE: